Catalogue

Valve rotating BEERS Б04

These valves are designed to operate at pressures (PN) up to 6.3 MPa, with nominal conduit diameter (DN) 50 mm - 250 mm with conditional capacity of 1.3 m3 / h - 2889 m3 / h.

Valves have almost linear, rating curve in the range of working angles from 25 to 70 angular degrees.

Download catalogue

Description

Valve rotating BEERS Б04

  • These valves are designed to operate at pressures (PN) up to 6.3 MPa, with nominal conduit diameter (DN) 50 mm - 250 mm with conditional capacity of 1.3 m3 / h - 2889 m3 / h.

Table 1. Standard Specification

Drive Model

Electric power drive BIRS 12; pneumatic BIRS 31 (32); manual control

Valve Model

URPS BIRS RVB

DN

mm

50

65

80

100

150

200

250

K vy

See the table for URPS BIRS RVB valves conditional capacity

PN

MPa

1,6; 2,5; 4,0; 6,3;

Connection to the pipe

Wafer type (F1), flange mounting (ledge-slot)

Body frame

st.20; st.09g2s; ст.12Х18Н10Т

Материал диска

St.12Х18Н10Т,

Seat’s materia

Ф4К20, Inconel 625

Temperature of controlled environment, ˚С

Variation from -60 to +450 depending on valve materials

Environment temperature, ˚С

Variation from -60 to +70

  • Wafer type (F1), flange mounting (ledge-slot) The frame body is performed of high-tensile sort rolled metal and is designed to work with critical pressures up to 10 MPa and temperatures up to 450 degrees.
  • The body frame of all-cast construction intended for operation in standard temperature and pressure range. The use of advanced casting technology allows to obtain product cases with precise linear dimensions, the absence of cavities in casting and excellent uniform density of the material.
  • The shutter disk is unified for all series of high-performance gates BIRS KPB. It is designed taking into account work at high speeds of working media and allows to reduce turbulence of working media flow. Shutter disk is manufactured using the most advanced casting technology and ensures reliable and flawless operation of the product during its service life.
  • A seat made of PTFE (soft seal) or Inconel (tough seal) of a special shape. It allows to obtain scaling up of the clamping force, depending on flow pressure increase in both directions of the environment motion and under vacuum conditions. To protect the seat from damage due to the impact of critical flow rates while opening or closing moments there are limiters of the sealing element in the valve body frame and pressure flange.
  • A shaft (rod) of high-performance gate BIRS KPB is made of high-strength corrosion-resistant steel of one-piece construction (up to DN 80 it is dissected for obtaining better characteristics). Two conical pins, mounted on the valve body side allow to obtain precise coupling with the disk.
  • Shaft-sleeves on which the shaft is mounted are installed in the upper and lower bosses of the body frame and serve as the lower and upper axial bearing. Depending on application conditions, simple and reinforced versions are distinguished. Shaft-sleeves are made of special alloy not subject to corrosion, resistant to abrasion and high mechanical stress, and also having high antifriction ability.
  • Sealing gland serves for reliabe and even hold-down of O-rings to the turning shaft of the high-performance shutter. Depending on pressure and temperature, different quantities of O-rings are applied consisting of thermal extended graphite of the special design. To adjust the seal element during performance it is enough to adjust the valve flange.
  • Each high-performance shutter BIRS * KPB has a site for drive with unified holes of ISO 5211 of two dimension series. This allowsto install fixtures on almost any control device of any manufacturer.
  • For the convenience of mounting high-performance BIRS KPB shutter of interflanged design on the pipline centering eye ends are constructed.
  • High-performance BIRS KPB shutter * design ensures high maintainability of the product. Replacement of seals and seat is possible in field conditions applying standard tools.
  • Valves URPS BIRS KPB meet the requirements of the standard TR TC 012. The product is assigned the category IIGbcT4.

Table 2. Conditional capacity of Kvy valves URPS BIRS KP

DN, mm

Conditional capacity m ³/hour

20

30

40

50

60

70

80

90

50

1,3

6

15

18

19

21

22

23

65

1,5

7

18

22

23

24

25

26

80

7

30

50

68

82

97

113

115

100

22

60

97

119

164

199

223

251

150

63

109

162

250

391

588

814

845

200

96

168

301

509

742

1107

1581

1747

250

264

458

682

980

1421

2083

2882

2889

Table 3. Mass dimensions of of the URPS BIRS PKB valves of interflange version.

DN, mm

PN, MPa (kgf / m2)

The

B

By

.

In

F

F1

D1

N-of

AND

Weight, kg

50

1,6

154

94

43

20

14(11)

90

70

125

2-18

F07

3,7

2,5

4

65

1,6

165

105

47

20

14(11)

90

70

145

2-18

F07

4,9

2,5

4

80

1,6

206

107

48

25

14

110

100

160

2-18

F07/F10

7,01

2,5

4

100

1,6

219

120

54

25

14

110

100

180

2-18

F07/F10

9,4

2,5

190

2-22

4

190

2-22

150

1,6

264

190

57

25

17

110

100

240

2-22

F07/F10

15,65

2,5

250

2-26

4

250

2-26

200

1,6

300

206

64

35

22

130

115

295

2-22

F12

22,3

2,5

310

2-28

23,4

4

320

2-30

23,5

250

1,6

365

254

72

40

27

150

150

355

4-26

F12

40,8

2,5

83

370

4-30

45,5

4

83

385

4-33

49,7

Table 4. Dimensions of the BURS BPRS PKB valve of flanged version.

OF,

PN

А

В

By

.

In

F

F1

C

n-of

D1

AND

50

1,6

154

94

94

20

14(11)

90

70

125

4-18

160

F07

2,5

4

65

1,6

165

105

97

20

14(11)

90

70

145

8-18

180

F07

2,5

4

80

1,6

206

107

103

25

14

110

100

160

8-18

195

F07/F10

2,5

4

100

1,6

219

120

113

25

14

110

100

190

8-18

130

F07/F10

2,5

4

150

1,6

264

190

120

25

17

110

100

250

8-26

300

F07/F10

2,5

4

200

1,6

300

206

131

35

22

130

115

310

12-26

360

F12

2,5

4

250

1,6

365

254

154

40

27

150

150

370

12-30

425

F12

2,5

4

Designation of URPS BIRS KPB valve when ordering.

URPS BIRS KPB.50.40.1.3.6.L.C, where

KPB - high-performance rotary valve

50-nominal diameter, mm

40-pressure, atm

1 - body frame material 09Г2С3

3-material of plunger 12x18h10t

6 - seat material - Inconel

L- linear cost characteristic

F1 - flat interflanged version according to State Standard 33259